- Issued:
- 2010-03-30
- Updated:
- 2010-03-30
RHBA-2010:0194 - Bug Fix Advisory
Synopsis
anaconda bug fix and enhancement update
Type/Severity
Bug Fix Advisory
Red Hat Insights patch analysis
Identify and remediate systems affected by this advisory.
Topic
An updated anaconda package that fixes several bugs and add various
enhancements is now available.
Description
Anaconda is the system installer.
This updated anaconda package provides fixes for the following bugs:
- KVM adapter S3-1621 is now properly recognized again (#445486)
- anaconda waits for USB keys and CDROM devices when running on blade
machines (#460566)
- Malayalam version has been updated to avoid overlapping buttons and text
that made the UI unusable (#479353)
- driver discs can now be located on CD and DVD devices (#485060)
- kickstart files and driver discs can again be downloaded through a
network (#495042)
- anaconda now avoids reinstalling packages which do not have to be
reinstalled (#495796)
- network interfaces not meant to be enabled at boot time now have hotplug
turned off too so that module loading does not trigger the configuration
either (#498086)
- The "--label" option for the "part" kickstart command now works correctly
(#498856)
- rescue mode now properly detects root partition even if it resides on a
logical volume and is identified by label in /etc/fstab (#502178)
- NETTYPE qeth has an updated description and mentions Hipersockets to help
users with manual configuration (#511962)
- anaconda now honours the RUNKS variable on S/390 (#513951)
- driver discs that reside on partitionless devices are properly recognized
(#515437)
- anaconda allows you to change your mind between different partitioning
options safely (#516715)
- if anaconda finds a valid iBFT network configuration, it configures the
network with the provided information (#517768)
- IPv6 addresses must be provided in the [address]:port form to comply with
the relevant RFCs (#525054)
- kickstart lines commented with multiple # characters are properly
regarded as comments now (#525676)
- the ghostscript-fonts package required by Ghostscript is now properly
installed when needed (#530548)
- anaconda now always instructs the kernel to check for multipath devices
on S/390 (#538129)
- EDD parsing was fixed to correctly support booting on system containing
SAS6i/R with two configured RAIDs (#540637)
- when drives needed to reconstruct a LVM device are deselected and not
used for installation, the LVM device is safely ignored (#545869)
- when a ksdevice is set to link, anaconda no longer reverts to interactive
mode during a kickstart install (#549751)
- EFI boot images for Itanium systems are smaller now, to allow booting on
size limited EFI ROMs (#556976)
- the list of included xorg drivers was updated to include newest additions
(#567666)
- anaconda waits longer for network interfaces on S/390 systems to get
ready (#506742)
In addition, this updated package provides the following enhancements:
- the CMS script for starting the install process on z/VM is now included
in the images (#475343)
- support for Brocade Fibre Channel to PCIe Host Bus Adapters is now
included to Anaconda (#475707)
- NFS options can be set during the interactive install (#493052)
- Hypervisor arguments can be specified in the kickstart file (#501438)
- Mpath root device can be pointed to an arbitrary LUN to use (#502768)
- kickstart files can be located on password-protected FTP servers
(#505424)
- anaconda now copies %pre and %post kickstart scriptlets to /tmp together
with a log (#510636)
- anaconda now supports the Reipl feature to instruct s/390 systems about
where to boot next (#512195)
- anaconda on PowerPC systems now supports N-Port-ID Virtualization
(#512237)
- anaconda now explicitly uses the system python (#521337)
- Emulex OneConnect iSCSI NIC is now supported in the install environment
(#529442)
- PMC Sierra MaxRAID controller adapters are now supported in the install
environment (#532777)
- kickstart files now support deselecting package groups (#558516)
Users are advised to upgrade to this updated anaconda package, which
resolves these issues and adds these enhancements.
Solution
Before applying this update, make sure that all previously-released
errata relevant to your system have been applied.
This update is available via Red Hat Network. Details on how to use
the Red Hat Network to apply this update are available at
http://kbase.redhat.com/faq/docs/DOC-11259
Affected Products
- Red Hat Enterprise Linux Server 5 x86_64
- Red Hat Enterprise Linux Server 5 ia64
- Red Hat Enterprise Linux Server 5 i386
- Red Hat Enterprise Linux Workstation 5 x86_64
- Red Hat Enterprise Linux Workstation 5 i386
- Red Hat Enterprise Linux Desktop 5 x86_64
- Red Hat Enterprise Linux Desktop 5 i386
- Red Hat Enterprise Linux for IBM z Systems 5 s390x
- Red Hat Enterprise Linux for Power, big endian 5 ppc
- Red Hat Enterprise Linux Server from RHUI 5 x86_64
- Red Hat Enterprise Linux Server from RHUI 5 i386
Fixes
- BZ - 475343 - [LTC 5.5 FEAT] Provide CMS script for initial IPL under z/VM [201594]
- BZ - 479353 - [ml_IN] Three buttons are not clickable during vnc install
- BZ - 495796 - anaconda upgrade needlessly reinstalls same version of RPMs
- BZ - 498856 - The "part" keyword in the kickstart file accepts an option named "--label" is ignored ?
- BZ - 505424 - Unable to retrieve kickstart from password-protected FTP server
- BZ - 510636 - [Stratus 5.5 bug] %pre/%post scripts report failure for no apparent reason
- BZ - 512195 - [LTC 5.5 FEAT] Reipl support [201719]
- BZ - 512237 - [LTC 5.5 FEAT] N-Port-ID (NPIV) install support for Linux on Power [201957]
- BZ - 513951 - Anaconda ignores value of RUNKS variable
- BZ - 525054 - [NetApp 5.5 bug] Error message is displayed when target port is provided during root on iSCSI installation
- BZ - 530548 - ghostscript-fonts which is required by ghostscript is not installed by anaconda.
- BZ - 538129 - "mpath" missing in default generic.prm, which prevents customers to do scsi multipath installation
- BZ - 538412 - [RHEL5][Anaconda] kickstart installations failing "Error downloading kickstart file"
- BZ - 545869 - AttributeError: 'NoneType' object has no attribute 'size'
- BZ - 549751 - install goes interactive with 2 NICs and ksdevice=link
- BZ - 556976 - ia64 rhel5.5 hvm installation fail.
- BZ - 557477 - Nfs related note shown when ftp or http installation is used
- BZ - 558516 - RFE: Better groups exclusion support
- BZ - 567666 - [1880708] Update anaconda xorg driver list
- BZ - 568691 - [5.5 beta 1] Anaconda adds second leading slash to NFS kickstart mount - breaks install
CVEs
(none)
References
(none)
Red Hat Enterprise Linux Server 5
SRPM | |
---|---|
anaconda-11.1.2.209-1.src.rpm | SHA-256: 19dfa159ec3ca317fbd8c19927d7e179717fcf228883a5f71dc0477ccb4baa29 |
x86_64 | |
anaconda-11.1.2.209-1.x86_64.rpm | SHA-256: f40741a37d6ab069b1fcf7e24be998ccbefbe5e3b2db8b397ba9fbb7338596f4 |
anaconda-runtime-11.1.2.209-1.x86_64.rpm | SHA-256: 801f07a998906000f36b04eb8bcba891ce9f0beec1a9bb91928cc31dfc21ba9a |
ia64 | |
anaconda-11.1.2.209-1.ia64.rpm | SHA-256: d7578c7b0dbdafa518eb3addbba9480bdce385df889b0efa531dbf9df9bdf203 |
anaconda-runtime-11.1.2.209-1.ia64.rpm | SHA-256: 9e3cce6349ca11854993ae5cfa8277d7af3a8169b8f7955c90bfef153ff8e46c |
i386 | |
anaconda-11.1.2.209-1.i386.rpm | SHA-256: f9cebe48860d3225d122d61189e2daa088647fe58c384268568444b71f21001d |
anaconda-runtime-11.1.2.209-1.i386.rpm | SHA-256: 63c598eaf811d19382838ad97b7bd8477e113fe22a14c54804a18978434f096c |
Red Hat Enterprise Linux Workstation 5
SRPM | |
---|---|
anaconda-11.1.2.209-1.src.rpm | SHA-256: 19dfa159ec3ca317fbd8c19927d7e179717fcf228883a5f71dc0477ccb4baa29 |
x86_64 | |
anaconda-11.1.2.209-1.x86_64.rpm | SHA-256: f40741a37d6ab069b1fcf7e24be998ccbefbe5e3b2db8b397ba9fbb7338596f4 |
anaconda-runtime-11.1.2.209-1.x86_64.rpm | SHA-256: 801f07a998906000f36b04eb8bcba891ce9f0beec1a9bb91928cc31dfc21ba9a |
i386 | |
anaconda-11.1.2.209-1.i386.rpm | SHA-256: f9cebe48860d3225d122d61189e2daa088647fe58c384268568444b71f21001d |
anaconda-runtime-11.1.2.209-1.i386.rpm | SHA-256: 63c598eaf811d19382838ad97b7bd8477e113fe22a14c54804a18978434f096c |
Red Hat Enterprise Linux Desktop 5
SRPM | |
---|---|
anaconda-11.1.2.209-1.src.rpm | SHA-256: 19dfa159ec3ca317fbd8c19927d7e179717fcf228883a5f71dc0477ccb4baa29 |
x86_64 | |
anaconda-11.1.2.209-1.x86_64.rpm | SHA-256: f40741a37d6ab069b1fcf7e24be998ccbefbe5e3b2db8b397ba9fbb7338596f4 |
anaconda-runtime-11.1.2.209-1.x86_64.rpm | SHA-256: 801f07a998906000f36b04eb8bcba891ce9f0beec1a9bb91928cc31dfc21ba9a |
i386 | |
anaconda-11.1.2.209-1.i386.rpm | SHA-256: f9cebe48860d3225d122d61189e2daa088647fe58c384268568444b71f21001d |
anaconda-runtime-11.1.2.209-1.i386.rpm | SHA-256: 63c598eaf811d19382838ad97b7bd8477e113fe22a14c54804a18978434f096c |
Red Hat Enterprise Linux for IBM z Systems 5
SRPM | |
---|---|
anaconda-11.1.2.209-1.src.rpm | SHA-256: 19dfa159ec3ca317fbd8c19927d7e179717fcf228883a5f71dc0477ccb4baa29 |
s390x | |
anaconda-11.1.2.209-1.s390x.rpm | SHA-256: 9f9c7cf142784cf1bd242be61c257aa0bafcb29661bbaa82aed1f448c1b26364 |
anaconda-runtime-11.1.2.209-1.s390x.rpm | SHA-256: b4a0035fcab17cb71223fc9b704d828242cdd2015319000449b3acfafba96e17 |
Red Hat Enterprise Linux for Power, big endian 5
SRPM | |
---|---|
anaconda-11.1.2.209-1.src.rpm | SHA-256: 19dfa159ec3ca317fbd8c19927d7e179717fcf228883a5f71dc0477ccb4baa29 |
ppc | |
anaconda-11.1.2.209-1.ppc.rpm | SHA-256: d5cd9c958d3e8b40028ed1e4d20341cf18483bf1aceba6d3c810b04b31b037c2 |
anaconda-runtime-11.1.2.209-1.ppc.rpm | SHA-256: 112eb9eae30cddc7bdfb884afaef62c419fd3a6ce0266e079cb2e712d0577f9c |
Red Hat Enterprise Linux Server from RHUI 5
SRPM | |
---|---|
anaconda-11.1.2.209-1.src.rpm | SHA-256: 19dfa159ec3ca317fbd8c19927d7e179717fcf228883a5f71dc0477ccb4baa29 |
x86_64 | |
anaconda-11.1.2.209-1.x86_64.rpm | SHA-256: f40741a37d6ab069b1fcf7e24be998ccbefbe5e3b2db8b397ba9fbb7338596f4 |
anaconda-runtime-11.1.2.209-1.x86_64.rpm | SHA-256: 801f07a998906000f36b04eb8bcba891ce9f0beec1a9bb91928cc31dfc21ba9a |
i386 | |
anaconda-11.1.2.209-1.i386.rpm | SHA-256: f9cebe48860d3225d122d61189e2daa088647fe58c384268568444b71f21001d |
anaconda-runtime-11.1.2.209-1.i386.rpm | SHA-256: 63c598eaf811d19382838ad97b7bd8477e113fe22a14c54804a18978434f096c |
The Red Hat security contact is secalert@redhat.com. More contact details at https://access.redhat.com/security/team/contact/.