- Issued:
- 2014-09-30
- Updated:
- 2014-09-30
RHBA-2014:1324 - Bug Fix Advisory
Synopsis
openstack-packstack and openstack-puppet-modules bug fix advisory
Type/Severity
Bug Fix Advisory
Red Hat Insights patch analysis
Identify and remediate systems affected by this advisory.
Topic
Updated openstack-packstack and openstack-puppet-modules packages for Packstack
which resolve various issues are now available for Red Hat Enterprise Linux
OpenStack Platform 5.0 (Icehouse) for RHEL 7.
Description
Red Hat Enterprise Linux OpenStack Platform provides the facilities for
building a private or public infrastructure-as-a-service (IaaS) cloud
running on commonly available physical hardware. This advisory includes
packages for:
- Installation service ("Packstack").
PackStack is a command-line utility for deploying OpenStack on existing
servers over an SSH connection. Deployment options are provided either
interactively, using the command line, or non-interactively by means of a
text file containing a set of preconfigured values for OpenStack
parameters.
PackStack is suitable for deploying the following types of configurations:
- Single-node proof-of-concept installations, where all controller services
and your virtual machines run on a single physical host. This is referred
to as an all-in-one install.
- Proof-of-concept installations, where there is a single controller node
and multiple compute nodes. This is similar to the all-in-one install
above, except you may use one or more additional hardware nodes for running
virtual machines.
These packages also fix various bugs. Documentation for these bug fixes is
available in the Technical Notes document:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux _OpenStack_Platform/5/html/Technical_Notes/index.html
Solution
Before applying this update, ensure all previously released errata
relevant to your system have been applied.
Red Hat Enterprise Linux OpenStack Platform 5 for RHEL 7 runs on Red Hat
Enterprise Linux 7.0.
The Red Hat Enterprise Linux OpenStack Platform 5 for RHEL 7 Release Notes
contain the following:
- An explanation of the way in which the provided components interact to form a
working cloud computing environment.
- Technology Previews, Recommended Practices, and Known Issues.
- The channels required for Red Hat Enterprise Linux OpenStack Platform 5 for
RHEL 7, including which channels need to be enabled and disabled.
The Release Notes are available at:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux_OpenStack_Platform/5/html/Release_Notes/index.html
This update is available through the Red Hat Network. Details on how to
use the Red Hat Network to apply this update are available at
https://access.redhat.com/site/articles/11258
Affected Products
- Red Hat OpenStack 5.0 for RHEL 7 x86_64
Fixes
- BZ - 1023221 - Packstack should configure Swift middleware that's used in Tempest
- BZ - 1024780 - puppet-ceilometer uses deprecated DEFAULT group for os_* credentials related config
- BZ - 1053734 - RFE: packstack and foreman should install the rhos sos plugins on all nodes
- BZ - 1098765 - Packstack should allow neutron-FWaaS and neutron-Metering installation flags
- BZ - 1099787 - iptables configuration is inconsistent between componenets
- BZ - 1102486 - PackStack interactive installer prompts for MySQL instead of MariaDB.
- BZ - 1103148 - [RFE] Allow packstack to setup Horizon with neutron LBaaS enabled, or FWaaS if FWaaS get's supported under packstack
- BZ - 1108155 - Packstack should configure heat to use trusts
- BZ - 1116431 - openstack-packstack: running packstack installation in interactive mode - one item is confusing.
- BZ - 1126844 - Add support for using Dell EqualLogic as backend for Cinder volumes
- BZ - 1128303 - packstack does not deploy multi-node swift setup
- BZ - 1129742 - [CISCO RHEL-OSP] Cannot connect to glance-api
- BZ - 1133968 - packstack does not always load the bridge.ko kernel module
- BZ - 1134433 - Packstack does not create heat iptables rules (port 8000, 8003, and 8004)
- BZ - 1138822 - work around iproute2 dynamic interface issue
CVEs
(none)
Red Hat OpenStack 5.0 for RHEL 7
SRPM | |
---|---|
openstack-packstack-2014.1.1-0.41.dev1251.el7ost.src.rpm | SHA-256: b390fe192f32ca39f424d91d42d3045376e1ec4e84698fb6d56a0b3cc566bc91 |
openstack-puppet-modules-2014.1-21.8.el7ost.src.rpm | SHA-256: 465cd66a28f2ba3cdd54895ee30d5a953482e1a214c6c1cbec97875631eb2f43 |
x86_64 | |
openstack-packstack-2014.1.1-0.41.dev1251.el7ost.noarch.rpm | SHA-256: 70e288c33b79a54595bd5e7f60c5dad51da2d6781719b537ec6742cfe1d877ee |
openstack-packstack-doc-2014.1.1-0.41.dev1251.el7ost.noarch.rpm | SHA-256: 4c750e10467d1cdadc37b3f439da4a3368f6556724373110bdd0647964447aba |
openstack-packstack-puppet-2014.1.1-0.41.dev1251.el7ost.noarch.rpm | SHA-256: fc99ba11eb8c322f4fee4a9518843e9972f05a3c6035fa4c04461371b9ed3503 |
openstack-puppet-modules-2014.1-21.8.el7ost.noarch.rpm | SHA-256: f09a86daf96f303fda088f45d1319fa9b51123f230e5109c4f763501881c6c57 |
The Red Hat security contact is secalert@redhat.com. More contact details at https://access.redhat.com/security/team/contact/.